| 1 |
High temperature test |
44102 |
Environmental testing for electric and electronic products-Part 2:Test methods-Test B: Dry heat GB/T 2423.2-2008 Method Bb 5.2 |
|
| MIL-STD-202H Method108 |
|
| 2 |
Low temperature test |
44101 |
Environmental testing for electric and electronic products-Part 2-1:Tests -Test A: Cold,IDT GB/T 2423.1-2008 Method Ab 5.2 |
|
| 3 |
Thermal cycling test |
40114 |
JEDECSTANDARDTemperature Cycling JESD22-A104E |
|
| 4 |
Biased humidity test |
44109 |
Environmental testing-Part 2:Test methods-Test Cy: Damp heat,steady state, accelerated test primarily intended for components GB/T 2423.50-2012 |
|
| MIL-STD-202H Method 103 |
|
| 5 |
Humidity teset |
44103 |
Environmental testing for electric and electronic products-Part 2:Test method-Test Cab: Damp heat,steady state GB/T 2423.3-2016 |
|
| 6 |
Thermal shock test |
40114 |
Environmental testing-Part 2:Test methods-Test N: Change of temperature GB/T 2423.22-2012 Method Na 7 |
|
| 7 |
Operational life test |
40299 |
MIL-PRF-27F 4.7.23 |
|
| 8 |
Terminal strength test |
40118 |
Environmental testing for electric and electronic products-Part 2:Test methods-Test U: Robustness of terminations and integral mounting devices GB/T 2423.60-2008 3 and 8.5.3 |
Accredited only for: Method Ua1 and Ue3 |
| MIL-STD-202H Method 211 |
Accredited only for: Test condition A |
| Method-006 PASSIVE COMPONENT Terminal Strength(SMD)/Shear Stress Test AEC-Q200 Rev D ATTACHMENT 6 AEC-Q200-006-REV A |
|
| 9 |
Board flex test |
40117 |
Method-006 PASSIVE COMPONENT SURFACE MOUNTED CERAMIC CAPACITORS BOARD FLEX TEST AEC-Q200 Rev D ATTACHMENT 5 AEC-Q200-005 |
|
| 10 |
High-voltage holding test |
40204 |
Test methods for eletronic and electrical component pasrts Method 301 GJB 360B-2009 Method 301 |
Accredited only for:DC/AC U≤5kV |
| 11 |
Mechanical shock test |
40108 |
MIL-STD-202H Method 213 |
Accredited only for maximum acceleration: 980m/s²; Impulse duration:6ms |
| 12 |
Drop test |
40107 |
Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment-type specimens GB/T2423.7-2018 |
Accredited only for method 1：Height: 500~1000) mm Load: less than 20kg |
| 13 |
Vibration (sine) test |
44107 |
Environmental testing for electric and electronic products Part 2:Test methods Test Fc: Vibration(sinusoidal) GB/T 2423.10-2019 |
Accredited only for frequency:(10~55)Hz; amplitude:1.5mm |
| MIL-STD-202H Method 204 |
Accredited only for condition B：Acceleration max=196m/s², Frequency:10Hz~2000Hz |
| 14 |
Resistance tosoldering heat test |
40205 |
Test methods for eletronic and electrical component pasrts Method 210 GJB 360B-2009 Method 210 |
Accredited only for:Test condition Band Test conditions I,J,K |
| MIL-STD-202H Method 210 |
Accredited only for:Test condition Band Test conditions I,J,K |
| 15 |
Solderability test |
40399 |
GB/T 2423.28-2005 2:Test methods-TestT：Soldering,IDT GB/T 2423.28-2005 |
Accredited only for test method 1. Sample size＜(W100*H40*D260)mm |
| Solderability Tests for Component Leads,Terminations,Lugs,Terminals and Wires J-STD-002D 4.2.6&4.2.7 |
Sample size＜(W100*H40*D260)mm |
| 16 |
Resistance tosolvents test |
40112 |
MIL-STD-202H Method 215 |
Accredited only for: 4.2.1a |
